SyndeskWork seamlessly across devices
Navigation
Login

Audio sharing

Let the client use the host’s microphone, and optionally return client audio for playback on the host. This guide uses two Macs.

Start with the audio direction

Microphone:Host’s physical microphone → SynDesk Microphone on the client → Meeting or recording app

Sound return:Client audio source → Playback device selected on the host

Switch on or off microphone sharing and audio return separately. If only the secondary device needs to use the microphone, the audio return can be turned off.

1. Connect the two computers

Install the same new version of SynDesk on both Macs, complete account login and computer activation, and connect to a local area network that can access each other.

The main unit selects “Share this computer’s peripherals”, the secondary unit selects “Use another computer”, and enter the local area network address displayed in the workspace. First confirm that the workspace shows “Connected”.

Keep TLS encryption enabled. When the fingerprint confirmation first appears, confirm consistency on both ends before allowing the connection.

Check computer connection and certificate configuration

2. Choose the microphone on the host

  1. First stop sharing, then open “Audio sharing” in the sidebar.
  2. Set “Share local microphone” to “On”.
  3. Select the actual microphone to use in the “Microphone input” section, such as the built-in microphone or a USB microphone.
  4. When using for the first time, allow SynDesk to use the microphone as prompted by the system.
  5. Click “Test microphone level”, speak and check that the meter responds. Stop the microphone test when finished.

For initial setup, you can first use the “Headphones” mode. Choose a real microphone as the source, and avoid connecting the virtual microphone back to yourself to form a sound loop.

3. Receive the shared microphone on the client

  1. Stop sharing, open “Audio sharing”, and set “Receive host microphone” to “On”.
  2. Check that the audio component is ready. If it is missing or needs repair, click “Repair audio” and follow the macOS installation authorization prompts.
  3. Return to the workspace, the main device starts sharing, the secondary device connects to the main device. When the audio reception confirmation appears, check the device and select “Allow audio connection”.
  4. In the client’s meeting or recording app, select SynDesk Microphone as the microphone input.
  5. Speak into the host's microphone, and check the input level in the secondary device's software or record a sound to confirm that the audio is actually received.

“Built-in audio ready” indicates the component is available, not that it is currently transmitting audio. Rely on the actual input from the secondary computer's software.

4. Return client audio when needed

If the meeting is running on the secondary device, but you want to hear the sound through the host's headphones or speakers, you can enable sound return.

  1. Stop sharing. On the client, enable “Send local audio” and select the audio source to send.
  2. On the host, enable “Play remote audio” and select headphones or speakers under “Audio playback device”.
  3. Restart the sharing, grant the corresponding audio permissions as prompted by the system, and play a sound on the secondary device to confirm.

Microphone input and audio playback are separate paths. The client’s meeting app still needs to use SynDesk Microphone as its microphone.

Headphones and speakerphone mode

Headphones
This is suitable for confirming the basic path of microphone sharing and audio return. The received audio is played through the headset, which can reduce the microphone picking it up again.
Speakerphone
On the host, set “Audio mode” to “Speakerphone”, then select the actual “Speaker computer” and its “Speaker output”. Approve sending the speaker reference audio when prompted so it can be used for echo cancellation.

Start speakerphone mode with one computer playing through speakers. Check for echo again after changing the speakers, volume, placement or microphone. Audio return alone does not confirm that echo cancellation is working.

Troubleshooting

Sharing switches are disabled
First stop sharing in the workspace, then adjust the audio options and reconnect afterwards.
The client cannot find SynDesk Microphone
Check the client’s audio component status, run “Repair audio”, and refresh the audio devices. If the installer requests a restart, restart before reopening the meeting app and selecting its input.
The host’s level meter moves, but the client receives no audio
Check the connection status of both workspaces, the receiver switch of the subordinate machine, audio reception confirmation, and the microphone currently selected in the meeting software. The main unit level only proves the local acquisition, not that the subordinate machine has received it.
The client receives microphone audio, but the host cannot hear the meeting
Check the secondary device's “Send local audio”, audio source, and the host's “Play remote audio”, playback device. If necessary, play a local sound on the secondary device first to locate the issue.
The log shows 'peer did not return a certificate'
This means the other party did not provide the certificate required for the connection. First, make sure both ends are updated to the same new version, then restart SynDesk; keep encryption and fingerprint verification enabled. If it still fails, provide activity logs from both ends at the same time, do not disable verification or send the private key file.
Sharing stops after sleep, restart or unplugging the microphone
Recheck the device selection and permissions, then start the sharing actively. Do not switch to another microphone without confirmation.

Scope

This guide is for Mac audio sharing within a local area network. The audio components, device options, and permissions for Windows and Linux are different, so you need to check the corresponding installation package and actual device.

After the first confirmation, test the audio return, speakerphone, and sleep recovery one by one. If there are issues, record the system version on both ends, SynDesk version, audio device name, and error message.